Products
Best quality Standard Ball Screws - Plastic Nuts Lead Screw with Good sliding properties – KGG Detail:
Lead Screw with Plastic Nuts Introduction And Selection Table
Heat resistance: The heat resistance with a thermal deformation temperature of260 deg c can be continuously used in a high temperature environment of170-200 deg c.
Drug resistance: lt is characterized by not being eroded by other acids, bases and organic solvents such as hot concentrated nitric acid.
Mechanical properties: Compared with other plastics, it has excellent strength, elasticity, mechanical properties, fatigue resistance and wear resistance.
Precision formability: lt has the characteristics of good fluidity and stable size during forming, and is suitable for precision forming.
Resurgence: Because no flame retardant was added, UL94 v-O standard experimental conditions were adopted, which gave full play to the characteristics of non-combustibility.
Electrical characteristics: lt has dielectric characteristics,insulation breakdown voltage and other aspects and also has excellent characteristics.
| Table of Shaft dia. and Lead Screw with Plastic Nuts | ||||||||||||||||||
| Lead (mm) | ||||||||||||||||||
| 1 | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 9 | 10 | 12 | 15 | 18 | 20 | 24 | 30 | 36 | ||
| Shaft dia (mm) | 4 | ● | ● | |||||||||||||||
| 5 | ● | |||||||||||||||||
| 6 | ● | ● | ● | ● | ● | ● | ||||||||||||
| 8 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||||
| 10 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||||||
| 12 | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||||||
| 15 | ● | ● | ● | ● | ● | |||||||||||||
Lead Screw with Plastic Nuts Details
High Lead Lubricated Overlap High Speed Ball Screw with PPS Nuts P-MSS
The precision grade of P-MSS series resin lead screw is subject to ct7 of ball screw. The axial clearance is0.02-0.07mm, and the axial clearance can also be set to 0 by selecting the toothless side clearance type.
Product detail pictures:
Related Product Guide:
High-quality comes 1st; support is foremost; business is cooperation" is our small business philosophy which is regularly observed and pursued by our organization for Best quality Standard Ball Screws - Plastic Nuts Lead Screw with Good sliding properties – KGG , The product will supply to all over the world, such as: Qatar, Paraguay, Nicaragua, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Paula from South Africa - 2018.06.18 17:25
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Jean Ascher from Karachi - 2017.01.28 18:53
You will hear from us quickly
Please send us your message. We will get back to you within one working day.
All fields marked with * are mandatory.
-
Top
